Surface Protection Tape with 'easy-peel' removability SPV A-series

SPV A-series (SPV 5058A5, SPV 5057A5, SPV 5059A7) are surface protection tapes suitable to protect high gloss surfaces during mechanical processes, storage and transportation.

Substrates involved can be lacquered plates, plastics, glass, laminates and reflective aluminium. A5-types are recommended to protect high gloss finishes, where A7-types are more suitable for matt appearing surfaces. These products consist of a PE film coated with a pressure sensitive “easy-peel” acrylic-based adhesive, available in various colours and adhesion levels.

Download

Datasheet

NBE_SPVAseries_ENG

Features
Structure
Properties
Applications

Features

Special "easy-peel" adhesive
Zipper effect during peel off
Very low unwind
Available in 2 different adhesion levels
For protection of high gloss surfaces
For protection of thin and fragile substrates
Good humidity resistance
Available in different colours
High transparency (SVP 5057A5F, SPV 5058A5F)
Substrate identification and inspection
Recyclable

Structure

Pressure sensitive acrylic-based "easy-peel" adhesive
PE film (clear, blue or green transparent)

Properties

	A5-type	A7-type	Test method
Film type	PE film	PE film
Adhesive type	Acrylic-based	Acrylic-based
Total thickness	0.050 mm	0.050 mm	EN 1942
Adhesion on BA steel	70 cN/20mm	150 cN/20mm	EN 1939
Tensile strength MD**	22 N/20mm	22 N/20mm	EN 14410
Elongation MD	250%	250%	EN 14410
Weatherability on BA steel*	75 hours	75 hours	ISO 4892-2
Colour (Transparent)	Blue 5057A5 - 5057A5F	Green 5059A7
Colour (Transparent)	Clear 5058A5 - 5058A5F
Transport and storage conditions	Temperature 15 to 30 °C
Transport and storage conditions	Relative humidity 40 to 75 %RH

* The weatherability is measured on BA steel. Depending on the substrate the weatherability performance can be different.
** MD=Machine Direction
CAUTION: The above are typical values and should not be used in writing specifications.
Details from the test methods are described on the customer product specification.

Applications

SPV A-series are surface protection tapes suitable to protect high gloss substrates like lacquered plates, plastics, glass, laminates and reflective aluminium. A5-types are recommended to protect high gloss finishes, where A7-types are more suitable for matt appearing surfaces. The use of these tapes makes it possible to process the protected surfaces with a high adhesion level. Furthermore, it makes them suitable to remove from thin and fragile substrates without deforming due to the low peeling force.

Back to product category list Back to product detail list