Surface Protection Tape for Fiber and CO2 laser cutting FIBERGUARD 3080H-series

Nitto FIBERGUARD 3080H-series are surface protection tapes, which protects metal surfaces during Fiber and CO2 laser cutting processes.

The unique concept exists of a special, printed blended PE carrier, combined with a special release layer and a modified rubber-based adhesive.

Download

Brochure

Datasheet

SDS

Brochure

Fiberguard_2023

Datasheet

NBE_FIBERGUARD3080Hseries_ENG

SDS

The information contained herein is based on all the documentation, information and data that can be obtained as of the date issued.

However, Nitto Denko Co., provides no warranties or guarantees, express or implied, regarding the accuracy or completeness of the information on contained amount, physical or/and chemical properties, and hazards or/and harm mentioned herein.

As for SDS of products categorized as "Article", Nitto Denko Co., voluntarily creates and releases the SDS for the particular products which frequently receive inquiries.

SDS_NBE_FIBERGUARD3080H_ENG

Features
Structure
Properties
Applications

Features

Available in medium and very high adhesion level
Low unwind during lamination
No pre-cutting required
No bubble-forming
No carbon black residue
Functional print
Film with high mechanical strength
Recyclable

Structure

Pressure sensitive rubber-based adhesive
White PE-Film, printed with arrows and the Nitto brand name
Special wax release coating

in blue print: FIBERGUARD 3080H5 BLUE

in grey print: FIBERGUARD 3080H3 LIGHT

Properties

	Typical Value		Test Method
	3080H5 BLUE	3080H3 LIGHT
Film type	PE film	PE film
Film colour	White	White
Print colour	Blue	Grey
Adhesive type	Rubber-based	Rubber-based
Total thickness	0.080 mm	0.080 mm	EN 1942
Adhesion on BA steel	300 cN/20 mm	150 cN/20 mm	EN 1939
Weatherability on BA steel*	25 hours	50 hours	ISO 4892-2
Tensile strength MD**	min. 23 N/20 mm		EN 14410
Elongation MD	min. 150%		EN 14410
Transport and storage conditions	Temperature 15 to 30°C
Transport and storage conditions	Relative humidity 40 to 75% RH

* The weatherability is measured on BA steel. Depending on the substrate the weatherability performance can be different.
** MD = Machine Direction
CAUTION: The above are typical values and should not be used in writing specifications.
Details from the test methods are described on the customer product specification.

Applications

Nitto FIBERGUARD 3080H-series protect metal surfaces during both Fiber and CO2 laser cutting processes. The combination of a printed unique white PE carrier with a rubber-based adhesive and a special wax release layer makes it the ideal protective tape for laser cutting processes. FIBERGUARD 3080H3 LIGHT has a medium adhesion level and is suitable for laser cutting of metal surfaces with a thickness up to 2mm. FIBERGUARD 3080H5 BLUE has very high adhesion level and is recommended for metal surfaces with a thickness above 2mm. In case of very rough metal surfaces and complex and dense cut shapes FIBERGUARD 3080H5 BLUE is a true problem solver.

Back to product category list Back to product detail list