Surface Protection Tape general purpose SPV 3100H-series

SPV 3100H-series are surface protection tapes suitable to protect metal surfaces and rough plastics during mechanical processes, storage and transportation.

These products consist of a PE film in various colours, coated with a pressure sensitive rubber-based adhesive.

Download

Datasheet

SDS

Datasheet

NBE_SPV3100H-series_ENG

SDS

The information contained herein is based on all the documentation, information and data that can be obtained as of the date issued.

However, Nitto Denko Co., provides no warranties or guarantees, express or implied, regarding the accuracy or completeness of the information on contained amount, physical or/and chemical properties, and hazards or/and harm mentioned herein.

As for SDS of products categorized as "Article", Nitto Denko Co., voluntarily creates and releases the SDS for the particular products which frequently receive inquiries.

SDS_NBE_SPV3100H_ENG

Features
Structure
Properties
Applications

Features

Increased mechanical protection
High adhesion level
Good weatherablility (SPV 3104H5)
Recyclable

Structure

Pressure sensitive rubber-based adhesive
PE film

Properties

	Typical Value	Test Method
Film type	PE film
Adhesive type	Rubber-based
Total thickness	0.100 mm	EN 1942
Adhesion on BA steel	250 cN/20 mm	EN 1939
Weatherability on BA steel*		ISO 4892-2
SPV 3103H (Black)	300 hours
SPV 3104H5 (Black/White)	600 hours
Tensile strength MD**	35 N/20 mm	EN 14410
Elongation MD	300%	EN 14410
Transport and storage conditions	Temperature 15 to 30 °C
Transport and storage conditions	Relative humidity 40 to 75% RH

* The weatherability is measured on BA steel. Depending on the substrate the weatherability performance can be different.
** MD = Machine Direction
CAUTION: The above are typical values and should not be used in writing specifications.
Details from the test methods are described on the customer product specification.

Applications

SPV 3100H-series are ideal products to protect rough, textured and low gloss surfaces. Typical substrates are stainless steel, anodised aluminium, plastics and coated metals (acrylic, PUR, polyester and epoxy powder coatings).

Back to product category list Back to product detail list