Surface Protection Tape for mechanical deformations of metals SPV 9205

SPV 9205 is a surface protection tape suitable to protect high gloss metals during mechanical processes such as deep drawing and profiling.

This product consists of a blue transparent PE film coated with a pressure sensitive “easy-peel” acrylic-based adhesive.

Download

Datasheet

SDS

Datasheet

NBE_SPV9205_ENG

SDS

The information contained herein is based on all the documentation, information and data that can be obtained as of the date issued.

However, Nitto Denko Co., provides no warranties or guarantees, express or implied, regarding the accuracy or completeness of the information on contained amount, physical or/and chemical properties, and hazards or/and harm mentioned herein.

As for SDS of products categorized as "Article", Nitto Denko Co., voluntarily creates and releases the SDS for the particular products which frequently receive inquiries.

SDS_NBE_SPV9205_ENG

Features
Structure
Properties
Applications

Features

Special "easy-peel" adhesive
Zipper effect during peel off
Very low unwind
High adhesion level
Good deformation behaviour
For protection of high gloss surfaces
Good humidity resistance
Substrate identification and inspection
Recyclable

Structure

Pressure sensitive acrylic-based "easy peel" adhesive
Blue transparent PE film

Properties

	Typical Value	Test Method
Film type	PE film
Adhesive type	Acrylic-based
Total thickness	0.060 mm	EN 1942
Adhesion on BA steel	200 cN/20 mm	EN 1939
Weatherability on BA steel *	25 hours	ISO 4892-2
Tensile strength MD **	25 N/20 mm	EN 14410
Elongation MD	250%	EN 14410
Transport and storage conditions	Temperature 15 to 30 °C
Transport and storage conditions	Relative humidity 40 to 75% RH

* The weatherability is measured on BA steel. Depending on the substrate the weatherability performance can be different.
** MD = Machine Direction
CAUTION: The above are typical values and should not be used in writing specifications.
Details from the test methods are described on the customer product specification.

Applications

SPV 9205 is a surface protection tape suitable to protect high gloss substrates such as aluminium, copper and stainless steel during mechanical processes. The use of this tape makes it possible to process the protected surfaces with a high adhesion level.

Back to product category list Back to product detail list