Nitto FIBERGUARD™ 509H10P is surface protection tape, which protects metal surfaces during Fiber and CO₂ laser cutting processes.
This product consists of printed PE film, combined with natural rubber adhesive which is improved for CO₂ and Fiber laser cutting processes.
 |
| Typical value | Test method | |
| Film type | LDPE film | - |
| Adhesive type | Rubber-based | - |
| Total thickness | 100 µm | BTM019 |
| Adhesion to BA steel | 340 cN/25mm | ISO 29862 |
| Weatherability on BA steel* | 100h | ISO 4892-2 |
| Tensile strength MD** | 45 N/25mm | ISO 29864 |
| Elongation MD** | 350% | ISO 29864 |
| Colour | Black/Gray with grey printed arrows and Nitto brand name | - |
*The weatherability is measured on BA steel. Depending on the substrate the weatherability performance can be different
*CAUTION: The above are typical values and should not be used in writing specifications. Details from the test methods are described on the customer product specifications
* MD = machine direction
Nitto FIBERGUARD™ 509H10P is a surface protection tape that protects metal surfaces during Fiber and CO₂ laser cutting processes, especially for high speed and performance laser cutting machines. Printed arrows allow you to install your metal in the appropriate direction after the laser cutting process. This will enable you to protect your substrate till the end of the supply chain, resulting in an optimum protection from scratches and impurities during various mechanical processes (bending, stamping, forming, etc.)
TEL +32-89-360111
Business Hours (WET) 8:00h-17:00h
Except for Sat, Sun, and Holidays
Nitto is present in 14 countries in the EMEA region. Find your local contact details here.
