SPV 4058H is a surface protection tape suitable to protect lacquered plates, plastics and laminates during mechanical processes, storage and transportation.
This product consist of a PE film coated with a pressure sensitive acrylic-based adhesive, available in two thickness levels
| Typical Value | Test Method | |
| Film type | PE film | |
| Adhesive type | Acrylic-based | |
| Total thickness | 50 μm | EN 1942 |
| Adhesion on BA steel | 290 cN/20 mm | EN 1939 |
| Tensile strength MD* | 22 N/20 mm | EN 14410 |
| Elongation MD | 250% | EN 14410 |
| Colour | Clear transparent | |
| Transport and storage conditions | Temperature 15 to 30°C | |
| Relative humidity 40 to 75% RH |
* MD = Machine Direction
CAUTION: The above are typical values and should not be used in writing specifications.
Details from the test methods are described on the customer product specification.
SPV 4058H is an ideal product to protect low gloss lacquered plates (such as acrylic, PUR, polyester, PVDF, epoxy powder coatings), matt aluminum plates, matt plastics (such as PMMA, ABS, PC, hard PVC) and laminates till the end of the supply chain against scratches and impurities. Depending on the protection required, these tapes are available in a thickness of 50 µm (SPV 4058H) or 80 µm (SPV 4088H). The pressure sensitive acrylic-based adhesive gives a high adhesion level and makes these products ideal for the protection of surfaces with a gloss level between 20 to 40%
TEL +32-89-360111
Business Hours (WET) 8:00h-17:00h
Except for Sat, Sun, and Holidays
Nitto is present in 14 countries in the EMEA region. Find your local contact details here.
