Double Sided Tape that Adheres Well to Rubber, Polypropylene or Curved Surfaces VR-5300/VR-5300H/VR-5000/VR-5000T

By using a special rubber adhesive, this double sided tape can be used various substrates such as not only metal or plastic, but also polyolefin materials, rubber or elastomer etc. Has high adhesion, as well as superior for adhesion the curved surfaces.

Download

Brochure

Datasheet

SDS

Brochure

Double_Sided_Tape_en

Datasheet

SDS

The information contained herein is based on all the documentation, information and data that can be obtained as of the date issued.

However, Nitto Denko Co., provides no warranties or guarantees, express or implied, regarding the accuracy or completeness of the information on contained amount, physical or/and chemical properties, and hazards or/and harm mentioned herein.

As for SDS of products categorized as "Article", Nitto Denko Co., voluntarily creates and releases the SDS for the particular products which frequently receive inquiries.

Features
Properties
Lineup
Applications
Precautions

Features

This special rubber adhesive is used for strong adhesion to various types of substrate.
Provides excellent repulsion resistance (adhesion to curved surfaces).
Does not contain RoHS 6 restricted substances.

Adhesive Strength

Adhesion of VR-5300 is nearly double than general double sided tape.

VR-5300	General tape

Properties

	VR-5300	VR-5300H	VR-5000	VR-5000T
Thickness	0.14 mm(5.5 mil)	0.10 mm(3.9 mil)	0.14 mm(5.5 mil)	0.30 mm(11.8 mil)
180° peeling force	30.0 N/20mm (130 oz/in)	25.0 N/20mm (114 oz/in)	30.0 N/20mm (130 oz/in)	50.0 N/20mm (216 oz/in)
Carrier	PET film		Non-woven fabric

* Measured by peeling in a 180° direction at a speed of 300 mm/min at 23℃ with 0.025 mm PET lining.
*The above values are sample observed values, not the guaranteed performance.

Repulsion resistance

	VR-5300	VR-5300H	VR-5000	VR-5000T	General Double Sided Tape
Distance floated [mm]	0	0	0	0	>10

Lineup

Applications

Fixing parts of digital camera・・・High adhesion to rubber

Fixing brash of vacum cleaner・・・High adhesion without primer

Fixing parts of toner cartridges・・・High repulsion resistance

Precautions

[Usage Precautions]

Make sure to remove any oils, moisture, dust, etc. from the substrate.
As this is a pressure-sensitive adhesive, make sure to thoroughly use a roller or press for crimping. If crimping is not performed thoroughly enough, its properties and external view may be negatively affected.
Clean adhesion may not occur if a surface is highly irregular or warped. Smooth it out as much as possible.
It takes a little time for the tape's original adhesive strength to take full effect, so avoid placing or using the tape in a situation in which a lot of strength is needed until several hours have passed from the time of attachment.

[Storage Precautions]

Make sure to store this product in a box.
Avoid storing in high-temperature or high-moisture areas. This product should be stored in a cool, dark area away from direct sunlight (at a temperature of no more than 25℃).
Please use this tape within 6 months of storage.

[Safety Precautions]

Take a careful consideration if this product is adapted to the use, purpose and condition before using. The tape may peel in some cases depending on substrate and attachment conditions.
When using this product in areas that may pose a risk of accident, use together with a different joining method.

Back to product category list Back to product detail list