• The adhesive tape releases minimal outgas.
• Silicone material is not intentionally used.
• Corrosive ion impurities are almost undetectable.
• Release liner can be peeled smoothly.
• 10 restricted substances by RoHS are not contained.

• *Total outgas :
• Device: GC/MS
• Heating conditions: 120℃ x 10 min
• Measurement standard: n-Decane
• Sampling method: Purge and trap headspace analysis

• *Siloxane gas:
• Device: GC/MS
• Heating conditions: 120℃ x 10 min
• Measurement standard: Dimethylsiloxane (D3 to D6)
• Sampling method: Purge and trap headspace analysis
• <0.4: under the measurement limit (0.4ng/cm²)

• *Impurity ions: Device: ion chromatograph
• Ion extraction method: hot water extraction
• Heating conditions: 100℃ x 45 min

• For plugging HDD casing holes

• Make sure to remove any oils, moisture, dust, etc. from the substrate.
• As this is a pressure-sensitive adhesive, make sure to apply ample pressure after attachment.
• Make sure to smooth out uneven or rough surfaces as much as possible.
• Some materials are difficult to attach to, such as rubber, polypropylene, and polyethylene. 　Please check this before use.
• A minimum temperature of 10℃ is suitable for attachment. 　(Initial adhesive strength is reduced at temperatures lower than 10℃ in the winter months, etc.)
• It takes a little time for the tape's original adhesive strength to take full effect, so avoid placing or using the tape in a situation in which a lot of strength is needed until several hours have passed from the time of attachment.
• Do not touch the tape with bare hands once removed from the wrapping.
• When using this product, please avoid contact with materials or tools containing silicone oil, machining oil, or release agents for rolling or metal molds.

[Storage Precautions]

• Make sure to store this product in a box.
• Avoid storing in high-temperature or high-moisture areas. This product should be stored in a cool, dark area away from direct sunlight.
• Please use this tape within 6 months after delivery.

[Safety Precautions]

• Take a careful consideration if this product is adapted to the use, purpose and condition before using. 
• The tape may peel in some cases depending on substrate and attachment conditions. 
• When using this product in areas that may pose a risk of accident, use together with a different joining method.