Surface Protective Materials E-MASK™ R/HR Series

Low contamination type developed for surface protective of electronic and optical parts.

E-MASK™ Series and HR Series are polyethylene-based surface protective materials developed utilizing Nitto Denko’s proprietary adhesive synthesis technologies. Both series are especially suitable for surface protective of LCD polarizing films, hard-coat or non-glare treated acrylic plates, and polyester films during processing and transportation.

Download

Brochure

Surface_Protective_Materials2_en

Features
Properties
Applications
Precautions

Features

Minimal change in adhesive strength following application ensures easy peeling.
Superior transparency enables inspection of the surface condition of the substrate without removing the tape.
Tape is pressure sensitive, and easily applied with a laminator.

Properties

Item	Thickness [mm] *1	Adhesive strength [N/20mm] *2
E-MASK™ R-50EP	0.060 mm/ 2.36 mil	0.10 N/20mm / 0.45 oz/in
E-MASK™ R-100	0.065 mm/ 2.56 mil	0.30 N/20mm / 1.40 oz/in
E-MASK™ R-200	0.065 mm/ 2.56 mil	0.50 N/20mm / 2.28 oz/in
E-MASK™ R-300	0.070 mm/ 2.76 mil	0.80 N/20mm / 3.65 oz/in
E-MASK™ HR-6010	0.063 mm/ 2.48 mil	0.50 N/20mm / 2.28 oz/in
E-MASK™ HR-6030	0.070 mm/ 2.76 mil	0.90 N/20mm / 4.11 oz/in

[Test method]

*1: Nominal thickness
*2: Adherent: Acrylic plate

Applications

Surface protective for optical film, such as polarizing film (e.g. during LCD shipping)

Precautions

Avoid sunlight and store at room temperature and moderate humidity.
Do not press too strong when applying. This may cause the end of the tape to peel.
If applying to surfaces treated with machining oil, degrease the surface carefully. Any remains will be a cause for surface contamination or adhesive residue.
For use under severe conditions, please test and evaluate the product thoroughly beforehand.
Painting, plating, etching, or gluing the surface after peeling the tape may be troublesome due to the small amount of residue of the adhesive. Please inspect under actual situations thoroughly before application.
Painted boards, depending on conditions such as paint baking, may cause the tape to peel uneasily or peel off the paint together. Please evaluate thoroughly beforehand.
Surface treated boards such as alumite, depending on treatment conditions, may show different properties (peeling) of SPV. Please evaluate thoroughly beforehand.
Especially for applications against natural substrate (marble stone, lumber, etc) please contact our sales representative in charge.

The above datasheet is a sample observation value under certain testing conditions, not guaranteed performance.
The quality, performance, and/or functions of this product will differ according to the conditions of use. Please contact our department in charge for full details of this product.
Under severe conditions, this product may show difference between the sample observed values and the actual performance. Please test and evaluate the product thoroughly for your safety and better results.
This product and/or its features may change or be discontinued without any prior notice.
The intellectual property rights of this document belongs to Nitto Denko Corporation. Please contact our department in charge for usage not in accordance of the intended use. Copying and/or reproducing the document without notice are strictly prohibited. All rights reserved.

Back to product category list Back to product detail list