Nitto 511M10P Light is a surface protection tape, which protects metal surfaces during Fiber and CO2 laser cutting processes.
The adhesion level is optimized to provide easier removal than Fiberguard 509H10P. The unique concept exists of a special, printed blended PE carrier, combined with a special release layer and a modified rubber-based adhesive.
 |
| Typical value | Test method | |
| Film type | PE film | - |
| Adhesive type | Rubber-based | - |
| Total thickness | 100 µm | BTM019 |
| Adhesion to BA steel | 2.10 N/25mm | BTM061 |
| Weatherability on BA steel* | 100h | ISO 4892-2 |
| Tensile strength MD** | 55 N/25mm | BTM023 |
| Elongation MD | 250% | BTM023 |
| Colour | Black/Gray with grey printed arrows and Nitto brand name | - |
| Transport and storage conditions | Temperature 15 to 30 °C | - |
| Relative humidity 40 to 75% RH | - |
* The weatherability is measured on BA steel. Depending on the substrate the weatherability performance can be different.
** MD = machine direction
TEL +32-89-360111
Business Hours (WET) 8:00h-17:00h
Except for Sat, Sun, and Holidays
Nitto is present in 14 countries in the EMEA region. Find your local contact details here.
