Surface Protective Materials SPV-CB-800K

Surface protective materials for rough surface painted steel plates and rough surface plastic plates as trim materials of automobile.

SPV-CB-800K is a surface protective material with a polyolefin film carrier. It has excellent weatherability and keeps the color and gloss of the coating evenly. It is suitable for rough surface painted steel plates and rough surface plastic plates as trim materials of automobile.

Download

Brochure

Datasheet

SDS

Brochure

BUILDING_CONSTRUCTION_en

Datasheet

NJ_SPV-CB-800K_EN

SDS

The information contained herein is based on all the documentation, information and data that can be obtained as of the date issued.

However, Nitto Denko Co., provides no warranties or guarantees, express or implied, regarding the accuracy or completeness of the information on contained amount, physical or/and chemical properties, and hazards or/and harm mentioned herein.

As for SDS of products categorized as "Article", Nitto Denko Co., voluntarily creates and releases the SDS for the particular products which frequently receive inquiries.

SDS_NJ_SPV-CB-800K_EN

Features
Properties
Applications
Precautions

Features

Excellent stability in adhesion over time.
Keeps the colors and shiny evenly.

Properties

Product No.	Thickness [mm]^*1	Adhesive strength[N/20mm] ^*2
SPV-CB-800K	0.065	11.9

[Test method]

*1:Nominal thickness
*2:Peeling angle: 180°, Peeling speed: 300mm/min

Applications

Surface protection for painted plates and resin plates (mainly rough surface plates) during process and transportation.

Precautions

Avoid sunlight and store at room temperature.
Do not press too strong when applying. This may cause the end of the tape to peel.
If applying to surfaces treated with machining oil, degrease the surface carefully. Any remains will be a cause for surface contamination or adhesive residue.
For use under severe conditions, please test and evaluate the product thoroughly beforehand.
Painting, plating, etching, or gluing the surface after peeling the tape may be troublesome due to the small amount of residue of the adhesive. Please inspect under actual situations thoroughly before application.
Painted boards, depending on conditions such as paint baking, may cause the tape to peel uneasily or peel off the paint together. Please evaluate thoroughly beforehand.
Surface treated boards such as alumite, depending on treatment conditions, may show different properties (peeling) of SPV. Please evaluate thoroughly beforehand.
Especially for applications against natural substrate (marble stone, lumber, etc.) please contact our sales representative in charge.

The above datasheet is a sample observation value under certain testing conditions, not guaranteed performance.
The quality, performance, and/or functions of this product will differ according to the conditions of use. Please contact our department in charge for full details of this product.
Under severe conditions, this product may show difference between the sample observed values and the actual performance. Please test and evaluate the product thoroughly for your safety and better results.
This product and/or its features may change or be discontinued without any prior notice.
The intellectual property rights of this document belongs to Nitto Denko Corporation. Please contact our department in charge for usage not in accordance of the intended use. Copying and/or reproducing the document without notice are strictly prohibited. All rights reserved.

Back to product category list Back to product detail list