Key requirements in surface protective materials for plastic plates are to control the adhesive strength in accordance with surface roughness while achieving well-balanced adhesion for adherends with partially different surface conditions.
Adherend Compatibility
Adherend
PO-SPV
Plastic
Acrylic resin/ABS
362 Series/J Series/P Series
Polycarbonate
P Series
PVC
364 Series/ J Series/V Series
Precautions
Avoid direct sunlight and store at ambient temperature/humidity.
Application of excessive pressure during lamination will cause the end of the tape to peel.
Degrease the surface thoroughly before laminating film to adherends treated with machining oil. Any remaining oil will cause surface contamination or leave adhesive residue.
Please test and evaluate the product thoroughly prior to use under severe conditions.
After the tape has been removed from the adherend, traces of the adhesive may remain, interfering with painting, plating, etching, or gluing of the surface. Please inspect conditions thoroughly before application.
Tape may peel off the paint from painted boards, depending on conditions, such as paint baking. Please evaluate thoroughly prior to use.
Surface treated boards, such as alumite, may exhibit different SPV (peeling) properties, depending on treatment conditions. Please evaluate thoroughly prior to use.
Please contact the respective sales division for applications using natural adherends (such as marble, stone or lumber).
Please evaluate the surface cleaning, priming, and paint baking conditions thoroughly when painting on surfaces after SPV is peeled off, and confirm the paint adhesion prior to use.
Please note that the surface of the adherend may repel paint or exhibit poor paint adhesion after SPV-3620 /362M/362X-2 is peeled off.
The above datasheet contains samples of observed values under certain testing conditions, not guaranteed performances.
The quality, performance, and functions of the product will differ according to conditions of use. Please contact the respective sales division for full product details.
The actual performance of the product may differ from the sample observation values under severe conditions. Please test and evaluate the product thoroughly for your safety and optimum results.
The product and its features are subject to change or discontinuation without prior notice.
The intellectual property rights of this document belong to Nitto Denko Corporation. Please contact our sales divisions regarding the use of this document for purposes not intended by Nitto Denko. Copying and/or reproducing documents without notice are strictly prohibited. All rights reserved.
