Skip to Main text

Petrolatum Anticorrosion Tape No.59 Series

For antirust/anticorrosion of irregular shapes. Petrolatum anticorrosion tape perfectly sticks to any shape.

No.59 Series uses a nonwoven fabric base impregnated with petrolatum-based compound made from petroleum, which has good elasticity, and closely sticks to any shape. It forms excellent antirust/anticorrosion layer with just a simple work of winding or applying, and smoothing.

Features

  • It brings out superior antirust/anticorrosion effect by shielding the metal surface against air and water.
  • Antirust/anticorrosion petrolatum changes red rust to black rust and stabilizes the material.
  • With its high-powered chemical-resistance, it prevents corrosion by acid, alkali, and bacteria.
  • Superior adhesive power of petrolatum continues forming of antirust/anticorrosion layer without having evaporation or hardening.
  • No special skill is needed, and it is easy to work with.
  • It perfectly adheres to any kind of complicated shape.
  • No need to heat. It forms anticorrosion layer by just winding and stroking.

Properties

PropertyUnitMeasured value
No.59LNo.59HNo.59HNNo.59HT
Thicknessmm1.11.11.11.1
Weightkg/m21.41.41.51.4
Elongation%15.015.015.015.0
Water absorption ratio0.10.10.10.1
Tensile strengthN/25mm Width78.078.078.078.0
Adhesive strength *1S60 or more60 or more60 or more60 or more
Volume resistivityΩcm1014101410141014
Resistance to thermal melting *2~+55~+65~+65~+90
[Remarks]

The above values are sample measured values, not the guaranteed performance.

*1 Adhesive strength test method

Affix a specimen of 25mm x 25mm on stainless steel plate with test temperature of 20℃, press the specimen with 5kg roller one pass back and forth, then apply 100g load and measure time until it falls down.

*2 Resistance to Thermal Melting Test Method

Wind the tape around a small pipe and set it horizontally in a homoiothermal chamber at designated temperature. After 24 hours, any dropping of the tape compound should not be found.

Line-up

[No.59L,No.59H]

For underground installation, underwater installation, etc.

[No.59HN]

For area that needs flame retardancy.

[No.59HT]

For high temperature section that needs heat-resistance. (Thermal melting resistant temperature: 90℃)

*Thermal melting resistant temperature means the drop temperature of the compound.

Applications

  • For various pipes (straight pipes, flanges, elbows, T-tubes, etc.)
  • For steel structures with complicated shape.
  • For steel structure in seawater and tidal zone. Taping is available after application of a primer of underwater paste. With appropriate covering, it forms long-lasting antirust/anticorrosion coating.

Download documents

The application manual (illustrated) for this product can be viewed in PDF format.

PDF Download

Contact Us

For inquiries about products.

Business Hours(Japan time) 9:00-17:30 Except for Sat, Sun, and Holidays

Global Site