• Superior wettability allows easy reapplication.
• Stable adhesion lasts without degradation over time.
• Superior in low staining properties.
  
• Excellent static control to cause no damage to sensors and repel foreign materials at peeling 

Anti-static property

Problem in general protection films with silicone-based adhesive	AW seiries
Repetitive application of the film infuses dust	Superior anti-static property repels dust
Low staining property
Glass surface reject LOCR due to staining caused by adhesive residue	Glass surface doesn’t reject LOCR as no staining caused by adhesive residue

• ※1　The value excludes thickness of release liner. 
• ※2　Tensile speed: 300 mm/min, tensile angle: 180 degrees, measured 20 to 40 minutes after lamination 
• ※3　Tensile speed: 300 mm/min, tensile angle: 180 degrees, measured 20 to 40 minutes after lamination
• ※4　Condition: 23 degrees C  x  50% Rh, tensile speed: 10 m/min, measured length: 100mm, measured with withstand voltage testing device
• ※5　Voltage: 100 V, duration: 10 seconds,  by resistivity meter (ring electrode type）

• Protection of smartphones and mobile phones during shipping
• Protection of touchscreens during manufacturing process
• Protection of touchscreens during shipping

• Avoid sunlight and store at room temperature and moderate humidity.
• Do not press too strong when applying. This may cause the end of the tape to peel.
• If applying to surfaces treated with machining oil, degrease the surface carefully. Any remains will be a cause for surface contamination or adhesive residue.
• For use under severe conditions, please test and evaluate the product thoroughly beforehand.
• Painting, plating, etching, or gluing the surface after peeling the tape may be troublesome due to the small amount of residue of the adhesive. Please inspect under actual situations thoroughly before application.
• Painted boards, depending on conditions such as paint baking, may cause the tape to peel uneasily or peel off the paint together. Please evaluate thoroughly beforehand.
• Surface treated boards such as alumite, depending on treatment conditions, may show different properties (peeling) of SPV. Please evaluate thoroughly beforehand.
• Especially for applications against natural substrate (marble stone, lumber, etc) please contact our sales representative in charge.

• The above datasheet is a sample observation value under certain testing conditions, not guaranteed performance.
• The quality, performance, and/or functions of this product will differ according to the conditions of use. Please contact our department in charge for full details of this product.
• Under severe conditions, this product may show difference between the sample observed values and the actual performance. Please test and evaluate the product thoroughly for your safety and better results.
• This product and/or its features may change or be discontinued without any prior notice.
• The intellectual property rights of this document belongs to Nitto Denko Corporation. Please contact our department in charge for usage not in accordance of the intended use. Copying and/or reproducing the document without notice are strictly prohibited. All rights reserved.